(+84) 0833585661 | (+84) 0 833 585 661
Danniel.ha@cadcamtech.com.vn
https://www.facebook.com/profile.php?id=100066824655517
Giờ làm việc 8h - 17h, Thứ 2 - Thứ 6
TS-253D-4G
Mô tả sản phẩm:
The TS-253D is powered by an Intel® Celeron® J4125 quad-core 2.0 GHz processor (bursts up to 2.7 GHz), features up to 8 GB DDR4 memory, and supports SATA 6 Gb/s drives. The support of Intel® AES-NI encryption engine boosts encryption performance while also maintaining the security of your NAS data. You can flexibly install SSDs for cache acceleration to maximize network and storage performance for data-intensive applications.
Liên hệ qua hotline 0833585661
Tổng quan sản phẩm
CPU | Intel® Celeron® J4125 4-core/4-thread processor, burst up to 2.7 GHz |
CPU Architecture | 64-bit x86 |
Graphic Processors | Intel® HD Graphics 600 |
Floating Point Unit | |
Encryption Engine | (AES-NI) |
Hardware-accelerated Transcoding | |
System Memory | 4 GB SODIMM DDR4 (1 x 4 GB) |
Maximum Memory | 8 GB (2 x 4GB) |
Memory Slot | 2 x SODIMM DDR4
For dual-DIMM configuration, you must use a pair of identical DDR4 modules. |
Flash Memory | 4GB (Dual boot OS protection) |
Drive Bay | 2 x 3.5-inch SATA 6Gb/s, 3Gb/s
The system is shipped without HDD. |
Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Hot-swappable | |
M.2 Slot | Optional via a PCIe adapter |
SSD Cache Acceleration Support | |
2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 2 (2.5G/1G/100M/10M) |
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) | Optional via PCIe expansion card |
10 Gigabit Ethernet Port | Optional via PCIe expansion card
Optional via PCIe expansion card |
Wake on LAN (WOL) |
Only the 2.5GbE port |
Jumbo Frame | |
PCIe Slot | 1 Slot 1: PCIe Gen 2 x4
PCIe bandwidth limitations will restrict the NAS 10GbE performance. |
USB 2.0 port | 3 |
USB 3.2 Gen 1 port | 2 |
USB 3.2 Gen 2 (10Gbps) Port | Optional via a PCIe expansion card |
IR Sensor | (Optional QNAP RM-IR004 remote control) |
HDMI Output | 1, HDMI 2.0 (up to 4096 x 2160 @ 60Hz) |
Form Factor | Tower |
LED Indicators | Power/Status, LAN, USB, HDD1-2 |
Buttons | Power, USB copy, Reset |
Dimensions (HxWxD) | 168 × 105 × 226 mm |
Weight (Net) | 1.55 kg |
Weight (Gross) | 2.68 kg |
Operating Temperature | 0 – 40 °C (32°F – 104°F) |
Storage Temperature | -20 – 70°C (-4°F – 158°F) |
Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | 65W adapter (12VDC), 100-240VAC |
Power Consumption: HDD Sleep Mode | 8.198 W |
Power Consumption: Operating Mode, Typical | 12.448 W
Tested with drives fully populated. |
Fan | 1 x 70mm, 12VDC |
System Warning | Buzzer |
Kensington Security Slot | |
Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 1500 |
Sản phẩm liên quan
Bên cạnh các phần mềm sản xuất CADCAMTECH còn dịch vụ CNTT chuyên nghiệp trọn gói cho doanh nghiệp, được phát triển bởi đội ngũ chuyên viên kỹ thuật của CADCAMTECH. Chúng tôi cung cấp đầy đủ các dịch vụ CNTT giúp doanh nghiệp ổn định hạ tầng công nghệ, giải quyết sự cố hệ thống nhanh chóng. Với đội ngũ đầy đủ bằng cấp chuyên môn, giàu kinh nghiệm, dịch vụ chất lượng hỗ trợ khách hàng các hoạt động CNTT nội bộ, giúp doanh nghiệp xây dựng, triển khai chiến lược công nghệ hiệu quả. CADCAMTECH sẽ đồng hành cùng doanh nghiệp giải quyết mọi vấn đề công nghệ, từ những công nghệ cơ bản đến những thách thức phức tạp. CADCAMTECH cung cấp đa dạng gói dịch vụ, đáp ứng mục tiêu kinh doanh, khắc phục khó khăn công nghệ cho doanh nghiệp. Hãy cùng tìm hiểu chi tiết dịch vụ CNTT chuyên nghiệp trọn gói cho doanh nghiệp (IT Service Desk, IT Manager) 2025 trong bài viết dưới đây.
Liên hệ tư vấn - hỗ trợ